Lediga jobb Dp Patterning AB i Norrköping

Se alla lediga jobb från Dp Patterning AB i Norrköping. Genom att välja ett specifikt yrke kan du även välja att se alla lediga jobb i Norrköping som finns inom det yrket.

Maskin- & Produktionstekniker

Vi söker en driven Maskin- & Produktionstekniker Trivs du som bäst i en flexibel och varierad roll med mycket eget ansvar? Vill du jobba inom ett snabbväxande och banbrytande teknikområde som bland annat bidrar till bilbranschens satsningar på elbilar? Nu söker vi en händig och lösningsorienterad person med högt kvalitetstänk som vill hänga med på vår resa. Arbetsuppgifter Hos DP Patterning kommer du att få en spännande mix av produktion, process och te... Visa mer
Vi söker en driven Maskin- & Produktionstekniker

Trivs du som bäst i en flexibel och varierad roll med mycket eget ansvar? Vill du jobba inom ett snabbväxande och banbrytande teknikområde som bland annat bidrar till bilbranschens satsningar på elbilar? Nu söker vi en händig och lösningsorienterad person med högt kvalitetstänk som vill hänga med på vår resa.

Arbetsuppgifter

Hos DP Patterning kommer du att få en spännande mix av produktion, process och teknikrelaterad problemlösning, härliga kollegor och möjlighet att se spännande verksamheter runt om i världen. Du kommer att ansvara för att planera dig egen tid för att lösa de uppgifter du ansvarar för. Du kommer att jobba nära vår kvalitetschef Joakim men även jobba i kundprojekt med tillsammans med våra erfarna projektledare. Vi tror på att mångfald bidrar till en bättre och roligare arbetsplats därför har vi redan nu en mix av olika nationaliteter.

Som maskintekniker kommer du att få en varierad vardag med roliga utmaningar både på kontoret, verkstaden och ibland ute hos kund. I våra (nyrenoverade och fräscha) lokaler i centrala Norrköping kommer du primärt att jobba med och kring vår maskin DPP – 360, en unik maskin som skapar stor kundnytta och som använder sig av de senaste tekniska lösningarna gällande både mjuk- och hårdvara.

På hemmaplan är du med att montera såväl delkomponenter som hela maskinsystem. Vid leverans och service av våra maskiner reser du till våra kunder som finns främst i Europa men även andra delar i världen. Där får du leverera en professionell installation, standardservice samt lösa problem på ett kreativt och hållbart sätt.

Som produktionstekniker kommer du vara en del av den dagliga verksamheten i verkstaden i Norrköping. Det innebär att tillverka verktyg, vara med att köra pilotproduktioner i maskinen och samordna logistik av våra leveranser. Du ansvarar även för att dagliga rutiner fungerar på kontoret och verkstaden.

Varmt välkommen med din ansökan,
Staffan, VD DP Patterning
Din profil

Det är viktigt är att du har god teknisk kompetens till exempel inom produktionsprocess, automation, el eller mekanik. Dessa kunskaper har du antingen förvärvat från en eftergymnasial utbildning eller genom tidigare arbeten. Du är självgående i ditt arbete och kan planera och strukturera din tid på kort och lång sikt utifrån dina arbetsuppgifter och ansvarsområden, där du tycker det saknas definierar du dina egna.

Vi söker dig som är praktiskt lagd och som har ett stort tekniskt intresse. Du anser att problem är till för att lösas och har förstått vikten av noggrannhet i utförandet och öga för detaljer. Du tar gärna för dig, är lösningsorienterad och inte rädd för att prova nya arbetsuppgifter även utanför din profession.

För att bli aktuell för rollen krävs

- Kunskaper inom produktionteknik eller el/mekanik
- Minst 1 års praktisk erfarenhet (som servicetekniker, mekanisk/elektrisk verkstad, produktionstekniker eller motsvarande)
- God förmåga att själv planera och strukturera sin tid
- Goda kunskaper i engelska (företags språk)
- B-körkort
- En flexibel livssituation som möjliggör resor med kort varsel


Meriterande kunskaper

- Six Sigma
- 5S
- PLC programering
- EL-behörighet
- Ritningsteknik

Om jobbet

- Tillsvidareanställning
- Heltid
- Resor (inrikes och utrikes) ingår i jobbet
- Arbetsplats Norrköping


We are an organically growing entrepreneurial company with a familiar and innovative feel. We focus on quality in everything we do. We started in 2006 in Norrköping with the idea of a groundbreaking idea, namely to change the way circuit board manufacturing is done. The innovation journey began as early as 2001 when our CEO Staffan Nordlinder was hired as a researcher at The Swedish Research Institute (RISE). The result after many years of research in electronics became a world-unique product. So now we support manufacturers in the automotive, LED Light and RFID with machines to create a flexible, environmentally friendly and cost-effective production of printed circuit boards. Today we are ten people with different specialist skills. Visa mindre

Maskin- & Produktionstekniker

Vi söker en driven Maskin- & Produktionstekniker Trivs du som bäst i en flexibel och varierad roll med mycket eget ansvar? Vill du jobba inom ett snabbväxande och banbrytande teknikområde som bland annat bidrar till bilbranschens satsningar på elbilar? Nu söker vi en händig och lösningsorienterad person med högt kvalitetstänk som vill hänga med på vår resa. Arbetsuppgifter Hos DP Patterning kommer du att få en spännande mix av produktion, process och te... Visa mer
Vi söker en driven Maskin- & Produktionstekniker

Trivs du som bäst i en flexibel och varierad roll med mycket eget ansvar? Vill du jobba inom ett snabbväxande och banbrytande teknikområde som bland annat bidrar till bilbranschens satsningar på elbilar? Nu söker vi en händig och lösningsorienterad person med högt kvalitetstänk som vill hänga med på vår resa.

Arbetsuppgifter

Hos DP Patterning kommer du att få en spännande mix av produktion, process och teknikrelaterad problemlösning, härliga kollegor och möjlighet att se spännande verksamheter runt om i världen. Du kommer att ansvara för att planera dig egen tid för att lösa de uppgifter du ansvarar för. Du kommer att jobba nära vår kvalitetschef Joakim men även jobba i kundprojekt med tillsammans med våra erfarna projektledare. Vi tror på att mångfald bidrar till en bättre och roligare arbetsplats därför har vi redan nu en mix av olika nationaliteter.

Som maskintekniker kommer du att få en varierad vardag med roliga utmaningar både på kontoret, verkstaden och ibland ute hos kund. I våra (nyrenoverade och fräscha) lokaler i centrala Norrköping kommer du primärt att jobba med och kring vår maskin DPP – 360, en unik maskin som skapar stor kundnytta och som använder sig av de senaste tekniska lösningarna gällande både mjuk- och hårdvara.

På hemmaplan är du med att montera såväl delkomponenter som hela maskinsystem. Vid leverans och service av våra maskiner reser du till våra kunder som finns främst i Europa men även andra delar i världen. Där får du leverera en professionell installation, standardservice samt lösa problem på ett kreativt och hållbart sätt.

Som produktionstekniker kommer du vara en del av den dagliga verksamheten i verkstaden i Norrköping. Det innebär att tillverka verktyg, vara med att köra pilotproduktioner i maskinen och samordna logistik av våra leveranser. Du ansvarar även för att dagliga rutiner fungerar på kontoret och verkstaden.

Varmt välkommen med din ansökan,
Staffan, VD DP Patterning
Din profil

Det är viktigt är att du har god teknisk kompetens till exempel inom produktionsprocess, automation, el eller mekanik. Dessa kunskaper har du antingen förvärvat från en eftergymnasial utbildning eller genom tidigare arbeten. Du är självgående i ditt arbete och kan planera och strukturera din tid på kort och lång sikt utifrån dina arbetsuppgifter och ansvarsområden, där du tycker det saknas definierar du dina egna.

Vi söker dig som är praktiskt lagd och som har ett stort tekniskt intresse. Du anser att problem är till för att lösas och har förstått vikten av noggrannhet i utförandet och öga för detaljer. Du tar gärna för dig, är lösningsorienterad och inte rädd för att prova nya arbetsuppgifter även utanför din profession.

För att bli aktuell för rollen krävs

- Kunskaper inom produktionteknik eller el/mekanik
- Minst 1 års praktisk erfarenhet (som servicetekniker, mekanisk/elektrisk verkstad, produktionstekniker eller motsvarande)
- God förmåga att själv planera och strukturera sin tid
- Goda kunskaper i engelska (företags språk)
- B-körkort
- En flexibel livssituation som möjliggör resor med kort varsel


Meriterande kunskaper

- Six Sigma
- 5S
- PLC programering
- EL-behörighet
- Ritningsteknik

Om jobbet

- Tillsvidareanställning
- Heltid
- Resor (inrikes och utrikes) ingår i jobbet
- Arbetsplats Norrköping


We are an organically growing entrepreneurial company with a familiar and innovative feel. We focus on quality in everything we do. We started in 2006 in Norrköping with the idea of a groundbreaking idea, namely to change the way circuit board manufacturing is done. The innovation journey began as early as 2001 when our CEO Staffan Nordlinder was hired as a researcher at The Swedish Research Institute (RISE). The result after many years of research in electronics became a world-unique product. So now we support manufacturers in the automotive, LED Light and RFID with machines to create a flexible, environmentally friendly and cost-effective production of printed circuit boards. Today we are ten people with different specialist skills. Visa mindre

Project Manager

Are you the one with a structured mind? Hi! My name is Roman, R&D Manager at DPP and we are looking for a colleague to join our team as a Project Manager. In your role you will be part of a team of highly skilled project managers and technical experts where we collaborate day-to-day on the flexible circuit board technology of the future. You will be working in small teams in research, development, delivery, sales, and operations and be responsible for th... Visa mer
Are you the one with a structured mind?

Hi! My name is Roman, R&D Manager at DPP and we are looking for a colleague to join our team as a Project Manager. In your role you will be part of a team of highly skilled project managers and technical experts where we collaborate day-to-day on the flexible circuit board technology of the future. You will be working in small teams in research, development, delivery, sales, and operations and be responsible for the delivery of contracted services to meet the customers’ expectations. You also constantly strive to develop and improve our own way of working in an agile environment.

You maintain tight control over the project schedule, risks, scope of work and budget, ensuring that operational teams and subcontractors have a clear understanding of customer requirements. To be successful in this role, you will need to build and maintain strong customer relationships and provide day-to-day customer advice and support.

Is this you?
We think that you have a fascination for novel technologies, experience in R&D, an understanding for business, a customer focused mindset, a high attention to detail, a can-do-attitude, and are willing to challenge the status quo. You can balance the need for speed to market with scalable processes.

You are a self-starter. You can manage your own work, priorities and independently drive your own topics and others forward. You are flexible and can develop new ways of working as our business changes and new products are created, meanwhile you understand the importance of transparency and communication. Plus, that you are a hands-on person who likes to get things done and, if needed, jumps right into the groundwork while cooperating with others.

We also think that you have a relevant education, a background in engineering/business/process development and your insight in mechanical projects is a plus.

How we make your everyday life go together.
Autonomy is in focus in this work, which means that you can both work independently and take responsibility, that you can use your skills and be open to development. Of course, you also get to be part of our community enabling a groundbreaking and world-unique technology. That is what we offer you, together with our benefits. You will be able to work both in peace and quiet and during very active phases while the company grows organically.

Let’s connect, apply for this opportunity!
Roman Lassnig

R&D Manager, DP Patterning

Your personal competencies

- Adjusts behavior quickly and effectively to meet a goal, overcome an objection, or resolve a concern.
- Strategically structures complex tasks and prioritizes in resource distribution.
- Is enthusiastic and positive, even in tough situations.
- Seeks new perspectives and ideas to improve performance and stimulate innovation.
- Seeks feedback from clients and uses it to improve the quality of products, services, and internal processes.
- Promotes team effectiveness by facilitating and building on the ideas of others.

Your knowledge

- Relevant education and experience in engineering and project management.
- Professional English proficiency is a requirement.
- Knowledge and experience of an agile way of work is an advantage.

Your experience

- Managing several parallel small to large projects in a delivery focused environment.
- Working under customer pressure to fulfill tasks with limited resources.
- Communicating effectively with a wide range of cultures and personalities.

Your passion

- Optimization in and around complex tasks.
- Enabling your colleagues to shine.
- Communication in high-pressure situations.
- Solving multifaceted challenges in effective ways.
- Being part of a highly skilled team where everyone constantly learns and develops.

Working facts

- Full time and until further notice.
- Travel is included in the job.
- Work at the office in Norrköping, remote work possible.


We are an organically growing entrepreneurial company with a familiar and innovative feel. We focus on quality in everything we do. We started in 2006 in Norrköping with the idea of a groundbreaking idea, namely to change the way circuit board manufacturing is done. The innovation journey began as early as 2001 when our CEO Staffan Nordlinder was hired as a researcher at The Swedish Research Institute (RISE). The result after many years of research in electronics became a world-unique product. So now we support manufacturers in the automotive, LED Light and RFID with machines to create a flexible, environmentally friendly and cost-effective production of printed circuit boards. Today we are ten people with different specialist skills. Visa mindre

Software Architect

Ansök    Jul 18    Dp Patterning AB    Mjukvaruutvecklare
Passionate about codes Are you the one that loves work closely with a team and who is passionate about codes, in specific software development? Welcome with your application, you will be able to work with green tech innovation within circuit board manufacturing. With us, machine manufacturing takes place based on a clear process, but we are also careful not to let it control free innovative thinking. After all, it is the combination that has created our ... Visa mer
Passionate about codes
Are you the one that loves work closely with a team and who is passionate about codes, in specific software development? Welcome with your application, you will be able to work with green tech innovation within circuit board manufacturing.

With us, machine manufacturing takes place based on a clear process, but we are also careful not to let it control free innovative thinking. After all, it is the combination that has created our world-unique product. We know that it requires more thought, but it is worth it as the focus is on delivering with high quality. That we develop a cool thing makes the job more exciting.

How we make your everyday life go together
Autonomy is in focus in this work, which means that you can both work independently and take responsibility, and that you can use your skills and be open to development. You get to be part of our community towards more groundbreaking and world-unique technology. That's what we offer you together with our benifits. You will be able to work both in peace and quiet while the company grows organically.

As a person, we believe that you are driven and have an ability to understand the team's goals and values. The personal qualities that we value are the ability to solve problems and, in that way, create confidence to build long lasting relationships with our customers. Lastly, we want someone who is genuinely interested in technology!

You will work agile together with a socially curious team; our mechanical designer David, the salesteam Göran & Rune, the project manager Roman, the programmer Andrey, our software developer Jakob, the process developer Joakim and last but not least the office dog Falco. In short, we like to have it familiar, both within the company and externally in meetings with our customers.

Let’s connect by starting to apply for this opportunity!

Warm regards,
Staffan, CEO DP Patterning
Your knowledge

- Software engineer

Your experience

- A few years of working experience
-
PLC programming
- Motion-programming and configuration of drives
- Object Oriented Software Development in IEC61131-3 Structured Text (ST)
- Knowledge of safety programming is a plus

-
Industrial fieldbus communication (EtherCAT, Ethernet / IP, Profinet, etc.)

-
Be able to keep track of the configuration of the machine, which includes network configuration, installed versions of software, databases and interfaces to overlying systems

-
A plus if you have experience with creating HMIs, preferably in Beckhoff TwinCAT (web-based, HTML / CSS / JavaScript)

-
A plus if you have experience with databases (/no)

-
A plus if you have worked with the entire TCP-IP stack, network configuration and VPN

-
A plus if you have experience with Version Management Systems (Git)

-
A plus if you can design and construct electrical systems

-
A plus if you are practically in electric mech

-
Curious to learn Beckhoff TwinCAT 3 (we will educate you)


Your passion

- Motion servodrives
- Vision-system
- To work agile and in groups with specialists
- Customer-oriented
- Curious as a person and in new technology such as AI…

Working facts

- Full time and until further notice
- Travel is included in the job
- Work remote and at the office in Norrköping


We are an organically growing entrepreneurial company with a familiar and innovative feel. We focus on quality in everything we do. We started in 2006 in Norrköping with the idea of a groundbreaking idea, namely to change the way circuit board manufacturing is done. The innovation journey began as early as 2001 when our CEO Staffan Nordlinder was hired as a researcher at The Swedish Research Institute (RISE). The result after many years of research in electronics became a world-unique product. So now we support manufacturers in the automotive, LED Light and RFID with machines to create a flexible, environmentally friendly and cost-effective production of printed circuit boards. Today we are ten people with different specialist skills. Visa mindre

Process Engineer

Are you an Engineer with a learning mindset? My name is Joakim and I am looking for a colleague with core competencies in Process & Quality Engineering and Continuous Improvement. We will be working closely together to cover for each other and complement each other’s skillset in our daily work. In your role you will be challenged by understanding and working with people in all fields. Do you know some scripting language or have other experience in codin... Visa mer
Are you an Engineer with a learning mindset?

My name is Joakim and I am looking for a colleague with core competencies in Process & Quality Engineering and Continuous Improvement. We will be working closely together to cover for each other and complement each other’s skillset in our daily work. In your role you will be challenged by understanding and working with people in all fields.

Do you know some scripting language or have other experience in coding? Great, because when Excel runs out of functions you will need it. Do you know about purchasing and requirement analysis? If not, you will learn it. Do you see a need for an improvement? It´s your turn to shine – bring out some Lean Six Sigma, or any functional methodology, to help bring positive change to our workplace!

Learning, mastering, and applying new knowledge will be your everyday habit, are you ready?

Is this you?
We think you get a warm and fuzzy feeling when looking at a beautifully made graph or Excel table. We think you are a machine-whisperer in the making and like to spend a lot of time learning obscure facts to explain why things are working in a certain way.

We also think that you have a relevant education and a background in industrial manufacturing.

How we make your everyday life go together.
Autonomy is in focus in this work, which means that you can both work independently and take responsibility, that you can use your skills and be open to development. Of course, you get to be part of our community towards more groundbreaking and world-unique technology. That is what we offer you together with our benefits.

Let’s connect, apply for this opportunity!

Joakim Snökvist, Process Engineer
DP Patterning

Your personal competencies

- Adjusts behavior quickly and effectively to meet a goal, overcome an objection, or resolve a concern.
- Strategically structures complex tasks and prioritizes in resource distribution.
- Is enthusiastic and positive, even under pressure
- Seeks new perspectives and ideas to improve performance and stimulate innovation.
- Seeks feedback from clients and uses it to improve the quality of products, services, and internal processes.
- Promotes team effectiveness by facilitating and building on the ideas of others.

Your knowledge

- We believe that you have a B.Sc. or M.Sc. degree in Mechanical Engineering.
- Certification in Lean Six Sigma or other continuous improvement methods are a plus
- Professional English proficiency is a requirement
- Knowledge and experience of agile way of work is an advantage.
- Your experience
- Experience working with IATF16949 and/or ISO9001 requirements.
- Experience or knowledge in launching, driving and evaluating Continuous Improvement projects
- Working with a diverse set of digital aids in your daily work, including but not limited by Python, Matlab, Excel, Minitab, Google, , etcetera
- Used to working with, modeling, and visualizing big data sets

Your passion

- Getting to the bottom of things
- Providing tangible quality of life improvements
- Learning new things
- Enabling others to shine
- Working facts

Facts

- Full time and until further notice
- Domestic and foreign travel is included in the job
- Work remote and at the office in Norrköping


We are an organically growing entrepreneurial company with a familiar and innovative feel. We focus on quality in everything we do. We started in 2006 in Norrköping with the idea of a groundbreaking idea, namely to change the way circuit board manufacturing is done. The innovation journey began as early as 2001 when our CEO Staffan Nordlinder was hired as a researcher at The Swedish Research Institute (RISE). The result after many years of research in electronics became a world-unique product. So now we support manufacturers in the automotive, LED Light and RFID with machines to create a flexible, environmentally friendly and cost-effective production of printed circuit boards. Today we are ten people with different specialist skills. Visa mindre

Mechanical & Mechatronics Designer

Are you passionate about design, electronics and to have dirty nails? My name is David and I am looking for a colleague to share knowledge with. I am looking for you that loves to work closely with a team and who is passionate about designing, testing and building prototypes, concepts and machines within mechanical engineering and mechatronics. Welcome with your application, you will be able to work with a great team on green tech innovation within flexibl... Visa mer
Are you passionate about design, electronics and to have dirty nails?
My name is David and I am looking for a colleague to share knowledge with. I am looking for you that loves to work closely with a team and who is passionate about designing, testing and building prototypes, concepts and machines within mechanical engineering and mechatronics. Welcome with your application, you will be able to work with a great team on green tech innovation within flexible circuit board manufacturing.

At DPP, machine manufacturing is a constantly evolving and based on R&D and new ideas. This way we get to test our theoretical knowledge but we are also careful not to let it control free innovative thinking. After all, it is the combination that has created our world-unique product. We know that it requires more thought, but it’s our goal to focus on delivering with exceptional high quality. That we develop a cool thing makes the whole thing a little more exciting.

How we make your everyday life go together.
Autonomy is in focus in this work, which means that you can both work independently and take responsibility, that you can use your skills and be open to development. Of course, you get to be part of our community towards more groundbreaking and world-unique technology. That's what we offer you together with our benefits. You will be able to work both in peace and quiet while the company grows organically.

Is this you?
As a person, we believe that you are driven and have an ability to understand the team's goals and values. The personal qualities that we value are the ability to solve problems and, in that way, create confidence to build long lasting relationships with our customers. Lastly, we want someone who is genuinely interested in technology!

You will work agile together with a socially curious team. In short, we like to have it familiar, both within the company and externally in meetings with our customers.

Let’s connect, apply for this opportunity!

Warm regards,

David, CTO
DP Patterning

Your knowledge

-
We believe that you have a B.Sc. or M.Sc. degree in Mechanical Engineering or equivalent with at least two years of professional experience.

-
You are fluent in both spoken and written English.

-
Furthermore, you are proficient in working with 3D-CAD, preferably SolidWorks. You can model solid parts and sheet metal with accompanying complete drawings for manufacturing. You can also edit and update existing parts and drawings for revision changes, looking back at a model feature tree and understand how it’s built.

-
Familiar with assembly and disassembly of mechanical components and understand what tools are needed and how they work.


Your responsibilities

- Design and development of products from concept to production.
- Development of project plans and delivery within agreed plans and timelines.
- Contacting suppliers for ordering machine parts and maintain discussions regarding technical questions.
- Handle customer support request and plan internal resources for quick and satisfactory deliveries. Maintaining customer contact in both written and spoken word.
- Learn the DPP process and assist the team in the daily operation to maintain a high level of customer satisfaction.

Your experience

Thus, you must demonstrate ability or experience in:

-
Problem solving techniques and methodical approaches.

-
Show curiosity and be open to learn new things and adopt to new information.

-
Work in a structured way to maintain information integrity.

-
Drivers licence


Meritorious experience

-
Assembly of mechanical and electrical systems.

-
Mechatronics design.

-
Control technology theory and/or implementation of control theory in machines.

-
Programming of PLC systems.

-
Knowledge in tooling and/or design of cutting tools and their geometry.



Your passion

We all have different passions that shapes us as individuals and are eager to get to know yours. In work we are very passionate and proud of what we do hope you feel the same.


Working facts

- Full time and until further notice
- Travel is included in the job
- Work remote and at the office in Norrköping


We are an organically growing entrepreneurial company with a familiar and innovative feel. We focus on quality in everything we do. We started in 2006 in Norrköping with the idea of a groundbreaking idea, namely to change the way circuit board manufacturing is done. The innovation journey began as early as 2001 when our CEO Staffan Nordlinder was hired as a researcher at The Swedish Research Institute (RISE). The result after many years of research in electronics became a world-unique product. So now we support manufacturers in the automotive, LED Light and RFID with machines to create a flexible, environmentally friendly and cost-effective production of printed circuit boards. Today we are ten people with different specialist skills. Visa mindre

Software Developer

Ansök    Mar 30    Dp Patterning AB    Mjukvaruutvecklare
A colleague to share code with My name is Jakob and I am currently looking for a colleague to work closely with and where we are both passionate about software development. In recent years, I have developed our software, which is available in a world-unique, environmentally friendly product in circuit board manufacturing. It is high time that I share my pride that I have developed together with my colleagues and suppliers. With us, machine manufacturing... Visa mer
A colleague to share code with

My name is Jakob and I am currently looking for a colleague to work closely with and where we are both passionate about software development. In recent years, I have developed our software, which is available in a world-unique, environmentally friendly product in circuit board manufacturing. It is high time that I share my pride that I have developed together with my colleagues and suppliers.

With us, machine manufacturing takes place based on a clear process, but we are also careful not to let it control free innovative thinking. After all, it is the combination that has created our world-unique product. We know that it requires more thought, but it is worth it as the focus is on delivering with high quality. That we develop a cool thing makes the whole thing a little more exciting. Our joint manager is called Staffan and is our CEO, he is a pragmatic person who allows us to grow into work both in peace and quiet but also drives the company's growth organically.

How we make your everyday life go together

I will ensure that you get a good introduction to our software and will continually bounce Code with you and eventually you will have to solve the challenges we face. You will also manage the software and be the contact with the customer in support matters.

Autonomy is in focus in this work, which means that you can both work independently and take responsibility, that you can use your skills and be open to development. Of course, you get to be part of our community towards more groundbreaking and world-unique technology. That's what we offer you.

In addition to a daily collaboration with me, you will work agile together with a socially curious team; our electrician Karin, mechanical designer David, the salesteam Göran & Rune, the project manager Roman, the programmer Andrey, the process developer Joakim, our CEO Staffan and last but not least the dog Falco. In short, we like to have it familiar, both within the company and the same feeling we want externally in meetings with our customers.

I look forward to your application,
Warm regards,
Jakob Sagatowski

Your knowledge

- Software engineer

Your experience

- A few years of working experience
-
PLC programming
- Motion-programming, and configuration of Drives
- Object Oriented Software Development in IEC61131-3 Structured Text (ST)
- Knowledge of safety programming is a plus

-
Industrial fieldbus communication (EtherCAT, Ethernet / IP, Profinet, etc.

-
Be able to keep track of the configuration of the machine, which includes network configuration, installed versions of software, databases and interfaces to overlying systems

-
A plus if you have experience with creating HMIs, preferably in Beckhoff TwinCAT (web-based, HTML / CSS / JavaScript)

-
A plus if you have experience with databases (/no)

-
A plus if you have worked with the entire TCP-IP stack, network configuration and VPN

-
A plus if you have experience with Version Management Systems (Git)

-
A plus if you can design and construct electrical systems

-
A plus if you are practically in electric mech

-
Curious to learn Beckhoff TwinCAT 3 (we will educate you)


Your passion

- Motion servodrives
- Vision-system
- To work agile and in groups with specialists
- Customer-oriented
- Curious as a person and in new technology such as AI…

Working facts

- Full time and until further notice
- Travel is included in the job
- Work remote and at the office in Norrköping


We are an organically growing entrepreneurial company with a familiar and innovative feel. We focus on quality in everything we do. We started in 2006 in Norrköping with the idea of a groundbreaking idea, namely to change the way circuit board manufacturing is done. The innovation journey began as early as 2001 when our CEO Staffan Nordlinder was hired as a researcher at The Swedish Research Institute (RISE). The result after many years of research in electronics became a world-unique product. So now we support manufacturers in the automotive, LED Light and RFID with machines to create a flexible, environmentally friendly and cost-effective production of printed circuit boards. Today we are ten people with different specialist skills. Visa mindre